Enclosed Trailer Products
15 products
Gerutu
Non-Resinous Hardwood 1x3 (Net 3/4" x 2-5/8") Std + Btr S4S Radius Edge Tieslat KD
Gerutu
Non-Resinous Hardwood 1x6 (Net 3/4" x 5-1/4") Std + Btr S4S Radius Edge Kickplate KD
Apitong, Keruing
Apitong, Keruing 1x3 S2SN2E (3/4" x 2-5/8") Std + Btr Stake Body Liner Slats KD
Mixed Malaysian Hardwoods
Mixed Hardwood 1-1/8" x 5-15/16" KB *** ON SALE *** Std + Btr Keyboard KD
Mixed Malaysian Hardwoods
Mixed Hardwood 1-1/8" x 12" x 12' LTF Std + Btr Shiplap Flooring
Mixed Malaysian Hardwoods
Mixed Hardwood 1-1/4" x 12" x 12' LTF Std + Btr Shiplap Flooring KD
Mixed Malaysian Hardwoods
Mixed Hardwood 1-3/8" x 5-15/16" KB *** ON SALE *** Std + Btr Keyboard KD
Mixed Malaysian Hardwoods
Mixed Hardwood 1-3/8" x 12" x 12' LTF Std + Btr Shiplap Flooring KD
Tung Oil, Wood Stain, Exterior Deck Stain
ExoShield Apitong Oil One Gallon Walnut Tung Oil Stain Exterior Finish
Trailer Deck Screws
Trailer Deck Screws 1/4-20 x 2" T30 Torx Partially Threaded Flat Head Type F Thread-Cutting Screw Phosphate Coated Hardware
Trailer Deck Screws
Trailer Deck Screws 5/16-18 x 2-1/2" T40 Torx Partially Threaded Flat Head Type F Thread Cutting Phosphate Coated Hardware
Trailer Deck Screws
Trailer Deck Screws 5/16-18 x 3" T40 Torx Partially Threaded Flat Head Type F Thread-Cutting Phosphate Coated Hardware
Trailer Deck Screws
Trailer Deck Screws 5/16-18 x 3-1/2" T40 Torx Partially Threaded Flat Head Type F Thread Cutting Phosphate Coated Hardware
Trailer Deck Screws
Trailer Deck Screws 5/16-18 x 4" T40 Torx Fully Threaded Flat Head Type F Thread Cutting Phosphate Coated Hardware
Trailer Deck Screws
Trailer Deck Screws 5/16-18 x 4" T40 Torx Partially Threaded Flat Head Type F Thread-Cutting Phosphate Coated Hardware
Enclosed Trailer and Van Body Products
Enclosed trailers, dry vans, and moving bodies use a different mix of wood parts than an open flatbed. Along with laminated truck flooring for the deck, this category covers the non-resinous hardwood trim that lines the interior: logistic tie slats, kickplate boards, and side liner slats.
These parts are milled S4S with a radius edge so they will not snag cargo or straps, in dense non-resinous Malaysian hardwoods that hold a screw and resist abrasion. Common sizes are nominal 1x3 and 1x6.