Deck Screws & Stain
13 products
Drill Bits
Drill Bits 7/32" Drill Bit - 12 Pack XL5 Industrial Hardware
Drill Bits
Drill Bits 82 Degree Countersink CSK18 Bit Industrial Hardware
Drill Bits
Drill Bits 9/32" Drill Bit - 12 Pack XL5 Industrial Hardware
Tung Oil, Wood Stain, Exterior Deck Stain
ExoShield Apitong Oil One Gallon Walnut Tung Oil Stain Exterior Finish
Industrial End Sealer
ExoWax Quart Clear Industrial End Seal
Torx Bit
Industrial Strength Torx Bit T30 Industrial Strength Torx Driver Bit
Torx Bit
Industrial Strength Torx Bit TORX T40 BIT Industrial Torx Driver Bit NA
Trailer Deck Screws
Trailer Deck Screws 1/4-20 x 2" T30 Torx Partially Threaded Flat Head Type F Thread-Cutting Screw Phosphate Coated Hardware
Trailer Deck Screws
Trailer Deck Screws 5/16-18 x 2-1/2" T40 Torx Partially Threaded Flat Head Type F Thread Cutting Phosphate Coated Hardware
Trailer Deck Screws
Trailer Deck Screws 5/16-18 x 3" T40 Torx Partially Threaded Flat Head Type F Thread-Cutting Phosphate Coated Hardware
Trailer Deck Screws
Trailer Deck Screws 5/16-18 x 3-1/2" T40 Torx Partially Threaded Flat Head Type F Thread Cutting Phosphate Coated Hardware
Trailer Deck Screws
Trailer Deck Screws 5/16-18 x 4" T40 Torx Fully Threaded Flat Head Type F Thread Cutting Phosphate Coated Hardware
Trailer Deck Screws
Trailer Deck Screws 5/16-18 x 4" T40 Torx Partially Threaded Flat Head Type F Thread-Cutting Phosphate Coated Hardware
Trailer Deck Screws, Torx Driver Bits, and Finishes
Industrial quality fasteners and premium finishes will extend the life of your trailer deck to the maximum extent possible. Our trailer deck screws are Type-F thread-cutting, phosphate-coated Torx (star drive) screws sized for dense tropical hardwood. Use our countsink drill bit so your screw sit flush without blowout. Our phosphate coated screws are used by most of the large OEM manufacturers becaus they just work - and they resist the corrosion that loosens ordinary screws. Sizes run from 1/4-20 x 2 inch up to 5/16-18 x 4 inch, in partially and fully threaded patterns.
- Industrial-strength T30 and T40 Torx driver bits
- Countersink and pilot drill bits for clean fastener seating
- ExoShield Apitong Oil, a walnut tung-oil exterior finish for hardwood decks
- ExoWax industrial end sealer for protecting cut board ends